Tag Archives: dental motor

China Hst-III-14-50 Mini Hallow Harmonic Drive Gearbox for Dental Equipment planetary gearbox dc motor

Leave a reply

Item Description

Product Description:

one.Flexspline is a hollow flanging normal cylinder framework.

2.There is a large-diameter hollow shaft hole in the center of the cam of the wave generator. The interior design and style of the reducer has a assist bearing.

three.It has a entirely sealed structure and is simple to set up. It is extremely appropriate for the events exactly where the wire demands to be threaded from the center of the reducer.

Positive aspects:

The initial:Large precision,high torque

The second:focused complex staff can be on-the-go to provide layout answers

The third:Manufacturing unit direct product sales fantastic workmanship resilient good quality assurance

The fourth:Product quality issues have a 1-year warranty time, can be returned for alternative or repair

Business profile:

 

HangZhou CZPT Engineering Co., Ltd. set up in 2014, is committed to the R & D plant of higher-precision transmission elements. At present, the yearly creation capability can reach 45000 sets of harmonic reducers. We firmly think in top quality very first. All backlinks from uncooked supplies to finished items are strictly supervised and managed, which provides a CZPT foundation for item top quality. Our merchandise are bought all over the place and abroad.

The harmonic reducer and other large-precision transmission elements had been independently created by the organization. Our business spends twenty% of its product sales every calendar year on the study and improvement of new technologies in the business. There are 5 individuals in R & D.

Our advantage is as below:

1.7 years of marketing and advertising expertise

two. 5-particular person R & D group to supply you with technological assist

3. It is sold at house and abroad and exported to Turkey and Eire

four. The item high quality is assured with a a single-year warranty

five. Merchandise can be personalized

Toughness manufacturing facility:

Our plant has an complete campus The amount of workshops is around three hundred No matter whether it is from the manufacturing of uncooked materials and the procurement of uncooked materials to the inspection of completed items, we’re doing it ourselves. There is a comprehensive creation system

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at commence cease The allowable optimum of the typical load torque Maximum torque is allowed in an immediate Allow the greatest speed to be entered Typical input speed is allowed Again gap layout lifestyle
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 fifty 6.2 .six twenty.7 two.one seven.9 .7 forty.3 4.one 7000 3000 ≤30 10000
eighty 9 .9 27 2.7 12.7 1.three 54.1 5.5
one hundred 9 .9 32 three.three 12.seven 1.three 62.one six.three
17 50 18.four one.nine 39 four 29.9 three eighty.five 8.2 6500 3000 ≤30 15000
80 25.3 two.six forty nine.five 5 31 three.2 a hundred.one 10.two
one hundred 27.6 two.eight sixty two six.3 forty five 4.6 124.two 12.seven
20 50 28.eight two.9 sixty four.four six.six 39 4 112.seven eleven.5 5600 3000 ≤30 15000
eighty 39.one four 85 eight.eight 54 5.five 146.one 14.9
one hundred 46 four.7 94.3 nine.six 56 5.eight 169.1 seventeen.2
a hundred and twenty forty six 4.7 one hundred ten.2 fifty six 5.eight 169.one seventeen.two
one hundred sixty forty six four.7 one hundred 10.two 56 five.eight 169.one 17.2
25 fifty 44.nine 4.6 113 eleven.five sixty three 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.four 158 sixteen.one 100 10.2 293.3 29.9
100 seventy seven.1 7.nine 181 18.4 124 twelve.7 326.6 33.three
one hundred twenty seventy seven.1 seven.nine 192 19.6 124 12.7 349.6 35.6
32 50 87.4 eight.9 248 twenty five.three 124 12.seven 439 44.eight 4000 3000 ≤30 15000
80 135.7 thirteen.eight 350 35.six 192 19.six 653 66.six
100 157.six 16.one 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at commence cease The allowable greatest of the common load torque Maximum torque is allowed in an immediate Let the greatest pace to be entered Average enter pace is allowed Back gap style existence
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 .seven 23 two.three nine .nine forty six four.7 14000 8500 ≤20 15000
eighty ten 1 thirty three.one 14 1.four sixty one six.2
one hundred ten one 36 3.7 14 one.four 70 7.2
17 fifty 21 2.1 44 4.5 34 3.four 91 9 10000 7300 ≤20 20000
eighty 29 2.nine fifty six five.7 35 3.six 113 twelve
a hundred 31 3.2 70 seven.2 fifty one 5.two 143 15
20 50 33 3.3 seventy three seven.four 44 4.five 127 thirteen 10000 6500 ≤20 20000
80 44 four.five ninety six nine.8 sixty one six.two 165 seventeen
one hundred 52 five.three 107 10.nine 64 six.5 191 20
one hundred twenty fifty two 5.3 113 eleven.5 sixty four 6.5 191 20
160 52 five.three a hundred and twenty 12.two 64 six.five 191 twenty
25 50 51 five.two 127 13 seventy two seven.three 242 twenty five 7500 5600 ≤20 20000
eighty eighty two 8.four 178 18 113 twelve 332 34
100 87 8.9 204 21 140 fourteen 369 38
a hundred and twenty 87 eight.9 217 22 140 14 395 40
32 fifty 99 10 281 29 140 fourteen 497 fifty one 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 seventy five
a hundred 178 18 433 44 281 29 841 86
40 100 345 35 738 seventy five 484 forty nine 1400 143 5600 4000 ≤20 20000

Exhibition:

Application circumstance:

FQA:
Q: What must I provide when I pick gearbox/velocity reducer?
A: The ideal way is to give the motor drawing with parameter. Our engineer will verify and suggest the most ideal gearbox design for your refer.
Or you can also give underneath specification as well:
1) Kind, product and torque.
2) Ratio or output pace
3) Operating issue and relationship technique
4) High quality and put in device title
five) Enter manner and enter velocity
6) Motor manufacturer model or flange and motor shaft dimensions


/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Car
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Shunting
Gear Shape: Bevel Gear
Step: Double-Step

###

Customization:
Available

|

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Car
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Shunting
Gear Shape: Bevel Gear
Step: Double-Step

###

Customization:
Available

|

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

What is a Planetary Gearbox?

A planetary gearbox is a mechanical device in which the teeth of a planet mesh with the teeth of its sun or ring. The number of teeth and the spacing of planets will determine whether the teeth mesh correctly. In this article, we will learn more about planetary gearboxes. Besides understanding their working, you can also learn how to design your own. Here are some examples:

planetary gearboxes

If your car has an automatic transmission, then a planetary gearbox is the type you have. It is possible to find out if you have this type of gearbox by consulting the owner’s manual, calling the service department of your car’s manufacturer, or conducting a search using your favorite search engine. However, planetary gears are more complex and have many more components than standard gearboxes. The following information will explain more about this type of gearbox.
Planetary gearboxes use three different gear types to transmit torque. The sun gear sits in the center of the gear assembly, while the other gears rotate around it. A carrier connects the two gears, and is designed to set the spacing between them. When the gears are rotated, the carrier will spin, enabling the entire assembly to work together. The carrier also incorporates the output shaft. For this gearbox to work effectively, it must meet the application’s requirements.
There are three main types of planetary gearboxes: the basic model is highly efficient and transmits 97% of the power input. The earliest models are not complex, but they do have some key differences. Some of these differences make them ideal for various applications. For example, a planetary gearbox can operate in alternating and continuous operation, with the output support having internal grooving. Some designs have more than one output shaft, allowing the user to choose the configuration and torque that is best for their application.
One of the main differences between a planetary gearbox and a conventional one is the way the planetary parts move. A planetary gearbox may have multiple axes for increased torque. A planetary gearbox can provide a torque up to 113,000 N.m. by rotating its maximum teeth simultaneously. They are the ideal choice for space-constrained applications. For instance, a car with small spaces can install one with ease.
A planetary gearbox’s gear ratio is determined by the ratio of the sun gear to the ring gear. The number of teeth on the sun gear is a way to adjust the gear ratio. Smaller sun gears result in larger planetary gear ratios, while larger ones cause a decrease in torque. The ratio between planetary gears ranges from 3:1 to 10:1, with the lowest ratio being three. The greatest possible ratio is 10:1.
A planetary gearbox has many benefits. The compact design makes them a more efficient choice for small motors and is advantageous for servo functions. Planetary gearboxes have low inertia, which is an important factor, especially in servo applications, since the inertia of the gearbox adds to the motor’s load inertia. The planetary gearboxes are typically lubricated with grease or oil, so you don’t need to worry about re-lubrication or maintenance.
planetarygearbox

planetary gearboxes with output shaft

The advantages of planetary gearboxes are numerous. They are widely used in many applications, from automobiles to medical equipment, goods & personnel lifts to machine tools. They are also used in derrick & dockyard cranes and slewing drives. These gearboxes are available in various sizes and shapes, ranging from small to extremely large. There are many different types, and each is designed to suit its intended use.
The LP generation 3 gearhead series combines maximum quality with economic precision in a low-backlash planetary gearbox. The output shaft version is especially suited for high-speed, highly dynamic cyclic operation. Another version is the SP+ HIGH SPEED. The SP+ high-speed version is designed to achieve maximum speeds while in continuous operation. If you need a planetary gearbox with an output shaft, look no further. It is the best choice for many applications.
As the name suggests, a planetary gearbox incorporates planetary parts and an output shaft. The outer gears (also called the planetary gears) are connected by a carrier to the output shaft. The carrier is then connected to the output shaft by a ring. There are two or more planetary gears inside the planetary gearbox. Each gear is connected to a carrier, which is connected to the output shaft.
An epicyclic planetary gear train can be assembled so that the planet gear rolls around the sun gear. In the wheel drive planetary gearbox, the planetary gears are grouped over the housing to optimize the size and weight of the system. The planetary gear train can handle torques as high as 332,000 N.m., with the ring gear being fixed while the sun gear is movable.
Another advantage of a planetary gearbox is that it uses many teeth at once. This allows for high speed reduction and high torque transmission, and it is extremely compact. Planetary gearboxes with output shaft are ideal for space-constrained applications. Their compact size and minimal weight make them a popular choice in many industries. They are also known as epicyclic gears and are used in many different types of machines.
A planetary gearbox can have three components. A central sun gear, an outer ring known as the inner gear, and an output shaft. These three components are linked by a carrier. The carrier rotates so that the input and output gears are in sync. They also have a standard gap between the gears. The carrier also acts as the output shaft. They can be used to create small machines, such as a bicycle acceleration hub.
planetarygearbox

planetary gearboxes with integer number of teeth

When designing a planetary gearbox, one must determine the amount of tooth count. This figure is known as the mesh load factor Kg, and is based on the normal tooth forces that are generated in each mesh. The number of planets, the error in the gear design, and the rigidity of the housing all affect Kg. Depending on the type of application, Kg can be calculated by using different standards.
In a typical planetary gearbox, the ratio is an integer number, and the lowest is 3:1. At a ratio of 10, the sun gear is too large and the sun wheel is too low to provide a sufficient amount of torque. In most cases, the ratio is an integer value, and the teeth are evenly spaced. The gear mesh is then balanced to grade 2. The carrier is measured three-dimensionally to detect the accuracy of the planet pin hole in the carrier.
In the simplest case, each planetary gear mesh produces a dynamic signal at its mesh frequency. These signals can cancel or reinforce in various ways. A helix angle, however, introduces axial forces into the gear mesh, which can be cancelled or reinforced in the same way as torques. As the helix angle is an integer number, this planetary gear model does not necessarily require infinite precision.
The resulting motion period is measured in rotational angles. This figure can be used to determine fault diagnosis and calculate the minimum data length required. It can also be used to calculate the kinematic motion of a faulty planet gear tooth. It is important to note that fault-mesh motion is not instantaneous, and therefore, it requires a sufficient amount of time to fully mesh a faulty planet gear.
The load-share factor is similar to that of spur and helical gearboxes, and can be used to calculate dynamic load sharing. When the load share factor is low, the individual gear meshes are slightly loaded. Deflections can vary, especially with high-precision gears. Therefore, the design process should incorporate the tolerance chain. This will ensure the correct ratio of gear mesh.
A planetary gearbox is a type of planetary gear system that is used in motors. It has a sun gear at the center and a set of outer gears. Each gear turns according to its axis around the sun. They are interconnected by a ring component and are connected to each other through a carrier. The carrier also includes the output shaft. And since the sun gear is centered, the mesh is standard.
As an added benefit, planetary gearboxes have sliding surfaces, which reduce noise and vibration. Despite the high-quality of planetary gearboxes, it is important to properly lubricate them to avoid wear and tear. CZPT uses CZPT. In order to make the planetary gearboxes last a long time, the lubricant is usually incorporated in the planetary gearbox.

China Hst-III-14-50 Mini Hallow Harmonic Drive Gearbox for Dental Equipment planetary gearbox dc motorChina Hst-III-14-50 Mini Hallow Harmonic Drive Gearbox for Dental Equipment planetary gearbox dc motor
editor by CX 2023-03-28